📚

All Subjects

 > 

🧪 

AP Chem

 > 

👟

Unit 5

5.5 Collision Model of Kinetics

4 min readapril 29, 2020

jacob521684

Jacob Jeffries

fiveable-dylan

Dylan Black


AP Chemistry 🧪

Bookmarked 6k • 251 resources
See Units

Resources:

What is the Collision Model?

The collision model essentially models molecules as projectiles moving in random directions with a fixed average speed that is determined by temperature. As these projectiles collide, they bounce off one another, preserving their kinetic energy and momentum. Thus, through this model, one can see that a reaction is nothing more than two atoms or molecules essentially slamming into each other with enough energy to cause a reaction (the energy needed to cause a reaction is called the activation energy). This can be seen in the following image:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2F19f17d293ff872d4d2acfb921947477c.png?alt=media&token=fb891e45-271c-435d-8bf4-652c5b64bf10

Image Courtesy of SaylorDotOrg

As we can see in this image, two molecules, nitrogen monoxide and ozone, slam together in an effective collision (we'll see what that means a bit later) to form nitrogen dioxide and molecular oxygen. This reaction serves as an example of what occurs during a chemical reaction according to the Kinetic Collision Model.

The Math Behind the Model

The collision model essentially models molecules as projectiles moving in random directions with a fixed average speed that is determined by temperature. As these projectiles collide, they bounce off one another, preserving their kinetic energy and momentum.
An important distinction to recognize is that these collisions are not actually random. Two particles colliding with one another have a very well-defined system of equations that one can use to solve for their trajectories. The first one is the statement of the conservation of kinetic energy:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2F-hTKdsLiLNxZs.JPG?alt=media&token=645c3bac-1970-4f6a-9189-abc57f796c26
The second one is the statement of conservation of momentum:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2F-npF5lXAEbp3H.JPG?alt=media&token=e6e57870-6618-475e-8d0a-40701b833259
m1 and m2 both describe the masses of particle 1 and particle 2, v1,i and v2,i both describe the initial velocities of particle 1 and 2 before the collision, and v1,f, and v2,f both define the final velocities of 1 and 2 after the collision. Qualitatively, Eq. 10 states that the total kinetic energy of the system stays constant, and Eq. 11 states that the total momentum of the system also stays constant.
However, a modification must be made to accurately describe reactive collisions (ie. a collision where a chemical reaction happens), as some of the kinetic energy must be expended to break and create new chemical bonds,  thus making the system’s total kinetic energy a non-constant variable.
These equations by themselves are not very useful on a macroscopic scale. These collisions take place within systems of many molecules, and Eq. 10 and Eq. 11 only describe two-particle collisions.  At any instant, if we assume each particle collides with another particle at the same time, we would need N/2 systems of equations to describe the system accurately, where N is the number of molecules in the system.
Since each system of equations has two equations, this means one would need (N/2)×2 = N equations to completely model the situation.  For the case of a 1.00 mol sample, this number is 6.02 × 10^23.  This would be an awful amount of algebra; I would not recommend doing this on paper if you would prefer to keep your fingers attached to your hands.
As such, we must treat the system statistically, meaning we calculate average values instead of individual values. This means we must modify Eq. 10 slightly:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2F-G5kLdT5xRPM7.JPG?alt=media&token=bd20098e-74c6-440b-be50-5065a1574f71
Aavg denotes the average of variable A. We can move the avg subscript to solely the v^2 term because m does not vary throughout the sample (assuming the sample is pure), thus its average is itself. However, this is a measurement of kinetic energy per particle, so we multiply the entire term by N, the number of particles, in order to obtain an expression for the total kinetic energy of the gas:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2Festsetset.png?alt=media&token=31b32841-6fba-498d-ab52-e3eaec18ccb1
This is an important equation as it also connects to Eq. 12, which means that, as the average speed of the molecules increases, so does the temperature of the sample and vice versa, since as average velocity increases, total kinetic energy increases. One might be tempted to equate (v2)avg to simply (vavg)^2. There are two reasons why this does not work. For the first example, let's look at three objects traveling at 5.0 m/s, 10 m/s, and 15 m/s. The average speed is:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2Ffdsdsddfsfds.png?alt=media&token=a14d315c-119a-4079-b34a-d212754048a1
However,
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2Fqqqq.png?alt=media&token=6cc87c1f-c846-40d0-bc43-f55902675aa3
The second reason is that, in an ideal sample, (vavg)^2 = 0, because the molecules are traveling with random speeds, so the number of molecules traveling to the right is the same as the number traveling leftwards, thus the velocities cancel out, making vavg = 0.

Interpreting the Collision Model

So what can we learn from the collision model about the rate of a chemical reaction? Well first and foremost, we learn that the faster a molecule is moving (and thus the more kinetic energy it has), the more collisions it will make and therefore the rate of reaction will be faster. How do we speed up molecules, you may ask? Well the easiest way to do so is to raise the temperature! The collision model tells us that, in general, when you heat up a reaction it tends to go faster due to more kinetic energy in molecules (this has come up before in FRQs!).

Effective and Ineffective Collisions

There's one big caveat to the collision model, and that's that not every collision will result in a chemical reaction. This is what separates an effective collision and an ineffective collision. An ineffective collision occurs when there isn't enough force, molecules are moving too slow, and/or the molecules aren't aligned right. This is why some reactions at different temperatures move at different rates. Here's a picture to help explain:
https://firebasestorage.googleapis.com/v0/b/fiveable-92889.appspot.com/o/images%2Fweeeeeeeeeeeeee.jpg?alt=media&token=cf9aefe7-1921-4b0a-8644-bddfa6ae7bbd

Image Courtesy of ChemistryClinic

Was this guide helpful?

Fiveable logo
Join Fiveable for free
Create a free account to bookmark content and compete in trivia
Hours Logo
Studying with Hours = the ultimate focus mode
Start a free study session
Browse Study Guides By Unit
📆Big Reviews: Finals & Exam Prep
✍️Free Response Questions
✏️Frequently Asked Questions
🧐Multiple Choice Questions
⚛️Unit 1: Atomic Structure and Properties
🤓Unit 2: Molecular and Ionic Compound Structures and Properties
🌀Unit 3: Intermolecular Forces and Properties
🧪Unit 4: Chemical Reactions
👟Unit 5: Kinetics
🔥Unit 6: Thermodynamics
⚖️Unit 7: Equilibrium
🍊Unit 8: Acids and Bases
🔋Unit 9: Applications of Thermodynamics
FREE AP chem Survival Pack + Cram Chart PDF
Sign up now for instant access to 2 amazing downloads to help you get a 5
Play this on HyperTyper
Practice your typing skills while reading Collision Model of Kinetics
Start Game